SLEEK TRANSITION FOR 4″ PVC
SLEEK TRANSITION FOR 4″ PVC
$54.27
Sleek transition for 4″ PVC WITH CONDENSATE BYPASS. This transition fitting eliminates several PVC fittings in an aerodynamic all-in-one solution and it has a condensate bypass!! Built in 30 degree angles mean all you have to do is add a straight run of PVC to make the transition from your radon fan flush with your home siding
Watch the finished install video here (dwnspt model shown) with cut measurements.
Material is PETG. UV resistant, outdoor-rated, and paintable. Clean with Acetone, prime, and paint.
Made by mitigators, for mitigators!
3D printed in the USA with specifications to the millimeter.
*You receive the top and bottom fitting. It’s up to you to cut the straight PVC to tie them together.*
2.5″ stub coming from wall or 4.5″ offset from wall if coming from the ground. Then 7 3/4″ piece in between the two parts of the sleek
Colorado-made. Support two small businesses with this purchase!
**Due to customer feedback, design changes may be implemented at anytime. Product received may not match photos on website because we’re always improving!!**
Description
Sleek transition for 4″ PVC WITH CONDENSATE BYPASS. This transition fitting eliminates several PVC fittings in an aerodynamic all-in-one solution and it has a condensate bypass!! Built in 30 degree angles mean all you have to do is add a straight run of PVC to make the transition from your radon fan flush with your home siding
Watch the finished install video here (dwnspt model shown) with cut measurements.
Material is PETG. UV resistant, outdoor-rated, and paintable. Clean with Acetone, prime, and paint.
Made by mitigators, for mitigators!
3D printed in the USA with specifications to the millimeter.
