KTA Box 100 ft. Box Only

KTA Box 100 ft. Box Only

$199.18

KTA 1.0 Power Supply 100 ft. Replacement Box Only

Replacement box for KTA 1.0 metered low-voltage 100′ systems.  Not to be used for 50′ or 25′ systems.

The KTA is the latest low-voltage system from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

Tutorial Video for Set Up

Help!  My meter is in the red!  (Perform a radon test)

Regarding KTA Systems:

24 volt Class 2 power limiting power supply
KTA 150 fan ( See Fan Characteristics for Fantech FR-150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths
System operation/failure indicator as required by EPA Mitigation Standards
Triple fail-safe electrical disconnect system at both fan and power supply
Five year limited warranty
Easy to interpret system indicator for homeowner
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

Replacement box for KTA low-voltage 100′ systems.  Not to be used for 50′ or 25′ systems.  See those replacements here

Cut your plastic use!  Box housing made of USA Steel!  Assembled by hand in Colorado, USA!

SKU: 03-005-1C-100 FT Box Only Category: Tag:

Description

KTA 1.0 Power Supply 100 ft. Replacement Box Only

Replacement box for KTA 1.0 metered low-voltage 100′ systems.  Not to be used for 50′ or 25′ systems.

The KTA is the latest low-voltage system from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

Tutorial Video for Set Up

Help!  My meter is in the red!  (Perform a radon test)

Regarding KTA Systems:

24 volt Class 2 power limiting power supply
KTA 150 fan ( See Fan Characteristics for Fantech FR-150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths
System operation/failure indicator as required by EPA Mitigation Standards
Triple fail-safe electrical disconnect system at both fan and power supply
Five year limited warranty
Easy to interpret system indicator for homeowner
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

Additional information

Weight 6 lbs
Dimensions 4.25 × 6 × 8.25 in

You may also like…