Fantech Rn2EC
Fantech Rn2EC
$299.00
Fantech Rn2EC
Fantech’s “Standard” now in a speed controlled EC version. Highly efficient EC motor means more energy savings for you!
Fantech Item Number 99927
Uses 4″ x 4″ or 4″ x 3″ couplers for 4″ or 3″ schedule 40 PVC pipe. 4″ strongly recommended.
- Quieter operation due to backward-inclined blades.
- Housing vibration welded for a tight seal
- Rotating motor, Class B insulation.
- Fan blades attached to rotating motor provide excellent motor heat dissipation, even at near zero RPM.
- Automatic thermal overload protection.
- Designed for operation in air stream temperatures up to 150 degrees Fahrenheit.
- Ball bearings are sealed and have a specially developed lubricant.
- UL listed for outdoor use/wet locations (approval #E128817).
- Backed with a five-year factory warranty.
- Available with attachable 6 ft. appliance cord 115v AC, 60 HZ.
- 4″ x 4″ fan couplings recommended
Capable of moving over 180 cfm
No EC fan comps with other manufacturers
Rn2EC-Rn4EC User Manual
Rn2EC Flyer
MSRP $350
The Rn2, one of Fantech’s most popular fans, now comes in a speed controlled model. It’s output can be tailored to the exact pressure field extension needed for each job. EC speed control can lower noise, energy, and fan curve all at once.
“It’s so nice to just install and dial it in. No need to swap between different fans. It costs more, but my labor is cut down. These would be really nice for new mitigators that just want to carry two fans and don’t understand fan curves or all the different fan models. The two EC fans have you covered. We fixed a house using only 4.5 watts of electricity!”
Jesse Green,
Owner, American Radon Mitigator
Anoka, MN
612-790-2928
“I installed the Rn2EC today. That thing is whisper quiet. The contractor that installed the radon system was here doing some furnace work for me and he did not believe it was even running until he looked at the manometer.”
Satisfied Homeowner wishing to remain anonymous
Description
Fantech Rn2EC
Fantech’s “Standard” now in a speed controlled EC version. Highly efficient EC motor means more energy savings for you!
Fantech Item Number 99927
Uses 4″ x 4″ or 4″ x 3″ couplers for 4″ or 3″ schedule 40 PVC pipe. 4″ strongly recommended.
- Quieter operation due to backward-inclined blades.
- Housing vibration welded for a tight seal
- Rotating motor, Class B insulation.
- Fan blades attached to rotating motor provide excellent motor heat dissipation, even at near zero RPM.
- Automatic thermal overload protection.
- Designed for operation in air stream temperatures up to 150 degrees Fahrenheit.
- Ball bearings are sealed and have a specially developed lubricant.
- UL listed for outdoor use/wet locations (approval #E128817).
- Backed with a five-year factory warranty.
- Available with attachable 6 ft. appliance cord 115v AC, 60 HZ.
- 4″ x 4″ fan couplings recommended
Capable of moving over 180 cfm
No EC fan comps with other manufacturers
Rn2EC-Rn4EC User Manual
Rn2EC Flyer
MSRP $350
