KTA-150 Mitigation Package Inside with LDVI Couplers

KTA-150 Mitigation Package Inside with LDVI Couplers

$496.29

This system is for attic fan installations only.

The KTA is the CLASS II low voltage fan from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

  • 24 volt Class 2 power limiting power supply.
  • KTA 150 fan (See Fan Characteristics for Fantech FR-150).
  • Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.
  • System operation/failure indicator as required by EPA Mitigation Standards.
  • Triple fail-safe electrical disconnect system at both fan and power supply.
  • Five year limited warranty on fan and meter indicator box
  • Easy to interpret system indicator for homeowner.
  • KTA Meter Indicator Boxes must always be installed inside the home.

KTA-150 Low Durometer Vibration Isolating Mitigation Package (Inside) includes:

  • KTA-150 Original Low Voltage fan with electronic system indicator.
  • Two, 4-inch flexible fan to pipe Low Durometer Vibration Isolating couplers.
  •  50′ of cable with integral electrical disconnect.
  • Charcoal canister short-term radon test kit & analysis.
  • Alpha Track long-term radon test kit & analysis.
  • Three system labels.

Description

This system is for attic fan installations only.

The KTA is the CLASS II low voltage fan from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

  • 24 volt Class 2 power limiting power supply.
  • KTA 150 fan (See Fan Characteristics for Fantech FR-150).
  • Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.
  • System operation/failure indicator as required by EPA Mitigation Standards.
  • Triple fail-safe electrical disconnect system at both fan and power supply.
  • Five year limited warranty on fan and meter indicator box
  • Easy to interpret system indicator for homeowner.
  • KTA Meter Indicator Boxes must always be installed inside the home.

Additional information

Weight 20 lbs
Dimensions 17.5 × 12.25 × 12.25 in