KTA-150 Mitigation Package Outside

KTA-150 Mitigation Package Outside

$493.02

KTA-150 Mitigation Package Outside Fan Placement

The KTA is the latest low voltage fan from PDS. The KTA 1.0 saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

24 volt Class 2 power limiting power supply for indoor placement

1.0 system.  No built in alarm

KTA 150 fan ( See Fan Characteristics for Fantech FR-150.

Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.

System operation/failure indicator as recommended by EPA Mitigation Standards.

Triple fail-safe electrical disconnect system at both fan and power supply.

Five year limited warranty on fan and meter indicator box

Easy to interpret system indicator for homeowner.

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

 

KTA-150 Mitigation Package-Outside fan placement includes:

KTA-150 Original Low Voltage fan.
Electronic system indicator.
Two, 4-inch flexible fan to pipe couplers.
25′, 50′, or 100′ of cable with integral electrical disconnect.
Charcoal canister short-term radon test kit & analysis.
Alpha Track long-term radon test kit & analysis.
Three system labels.
Hydro-sep water separation device.

Description

KTA-150 Mitigation Package Outside Fan Placement

The KTA is the latest low voltage fan from PDS. The KTA 1.0 saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

24 volt Class 2 power limiting power supply for indoor placement

1.0 system.  No built in alarm

KTA 150 fan ( See Fan Characteristics for Fantech FR-150.

Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.

System operation/failure indicator as recommended by EPA Mitigation Standards.

Triple fail-safe electrical disconnect system at both fan and power supply.

Five year limited warranty on fan and meter indicator box

Easy to interpret system indicator for homeowner.

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

 

Additional information

Weight 24.5 lbs
Dimensions 23 × 12 × 12 in