KTA 150 System w/25 ft Cable
KTA 150 System w/25 ft Cable
$503.43
KTA 1.0 LV Radon System w/25 ft Cable
Trusted Low Voltage Radon Systems for over 30 years!
MSRP over $499
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
Regarding KTA Systems:
24 volt Class 2 power 1.0 limiting power supply
KTA 150 fan ( See Fan Characteristics for Fantech FR-150, now PDS 150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths
System operation/failure indicator as required by EPA Mitigation Standards
Triple fail-safe electrical disconnect system at both fan and power supply
Five year limited warranty on fan and meter indicator box
Easy to interpret system indicator for homeowner
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system
Available with UV resistant cable; call for ordering information. Capable of moving over 320 cfm
Normal operating temperature of KTA low voltage box is over 100 degrees Fahrenheit. KTA box has redundant thermal fail-safes in case of overheating. Box can be hot to the touch, and should be placed indoors free from any obstructions.
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.
System Set Up Tutorial Video
The KTA 1.0 Low-Voltage System is the original low-voltage mitigation system. Field tested for over 30 years, it’s one of the best selling systems in the country. For use in instances when fans will be installed away from a power source, the KTA systems allows for fans to be placed up to 100 ft away from a wall outlet.
Do not cut cord below 25′
Cut your plastic use! Box Housing made of USA Steel! Assembled by hand in Colorado, USA!
Description
KTA 1.0 LV Radon System w/25 ft Cable
Trusted Low Voltage Radon Systems for over 30 years!
MSRP over $499
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
Regarding KTA Systems:
24 volt Class 2 power 1.0 limiting power supply
KTA 150 fan ( See Fan Characteristics for Fantech FR-150, now PDS 150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths
System operation/failure indicator as required by EPA Mitigation Standards
Triple fail-safe electrical disconnect system at both fan and power supply
Five year limited warranty on fan and meter indicator box
Easy to interpret system indicator for homeowner
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system
Available with UV resistant cable; call for ordering information. Capable of moving over 320 cfm
Normal operating temperature of KTA low voltage box is over 100 degrees Fahrenheit. KTA box has redundant thermal fail-safes in case of overheating. Box can be hot to the touch, and should be placed indoors free from any obstructions.
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.
System Set Up Tutorial Video
