KTA 1.0 Box Assembly
KTA 1.0 Box Assembly
$219.10
KTA 1.0 Low Voltage Power Supply Box Replacement
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
Watch our tutorial Video
Help! My meter is in the red —HINT perform a radon test
Normal operating temperature of KTA box is over 100 degrees Fahrenheit. KTA box has redundant thermal fail-safes in case of overheating. Box can be hot to the touch, and should be placed indoors free from any obstructions.
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.
24 volt Class 2 power limiting power supply
Five year limited warranty
This KTA 1.0 replacement box assembly fits 25′ and 50′ KTA low-voltage systems (100′ systems require a special power supply here) & only works with a KTA 150 low voltage fan.
Cut your plastic use! Box housing made of USA Steel! Assembled by hand in Colorado, USA!
Description
KTA 1.0 Low Voltage Power Supply Box Replacement
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
Watch our tutorial Video
Help! My meter is in the red —HINT perform a radon test
Normal operating temperature of KTA box is over 100 degrees Fahrenheit. KTA box has redundant thermal fail-safes in case of overheating. Box can be hot to the touch, and should be placed indoors free from any obstructions.
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.
24 volt Class 2 power limiting power supply
Five year limited warranty
