LV-Rn1 System w/50 ft Cable

LV-Rn1 System w/50 ft Cable

$394.59

LV-Rn1 System w/50 ft Cable

The LV-Rn1 is the latest low voltage fan from PDS. Formerly the LV-2133, this system has the same time-saving qualities as the KTA-150 but with a lower volume fan. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy- to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading.

If you are a homeowner installing your own system, you will appreciate the simplicity of installing the LV system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

Regarding the LV Rn1 System:

24 volt Class 2 power limiting power supply.
Rn1 fan (See Fan Characteristics for Fantech Rn1).
Special Class 2 cable available in 25 and 50 ft. lengths.
System operation/failure indicator as required by EPA Mitigation Standards.
Triple fail safe electrical disconnect system at both fan and power supply.
Five year limited warranty on fan and meter indicator box
Easy to interpret system indicator for homeowner. Circuit breaker that will trip under high load conditions such as blockage to improve fan life.

Available with UV resistant cable; call for ordering information.

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

Rn1

The LV Rn1 low-voltage system has the same time saving qualities as the KTA-150 but with a smaller fan.

Do not cut cord; simply wrap and zip tie any extra cable

Description

LV-Rn1 System w/50 ft Cable

The LV-Rn1 is the latest low voltage fan from PDS. Formerly the LV-2133, this system has the same time-saving qualities as the KTA-150 but with a lower volume fan. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy- to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading.

If you are a homeowner installing your own system, you will appreciate the simplicity of installing the LV system. If you are a professional installer, you will appreciate the speed of installation as well as positive comments from your clients.

Regarding the LV Rn1 System:

24 volt Class 2 power limiting power supply.
Rn1 fan (See Fan Characteristics for Fantech Rn1).
Special Class 2 cable available in 25 and 50 ft. lengths.
System operation/failure indicator as required by EPA Mitigation Standards.
Triple fail safe electrical disconnect system at both fan and power supply.
Five year limited warranty on fan and meter indicator box
Easy to interpret system indicator for homeowner. Circuit breaker that will trip under high load conditions such as blockage to improve fan life.

Available with UV resistant cable; call for ordering information.

KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.

Rn1

Additional information

Weight 12.65 lbs
Dimensions 12 × 12 × 16 in