Soil Gas Collector T

Soil Gas Collector T

$44.20

Soil Gas Collector “T Riser”

Another key element of a soil gas collection system is attaching the riser to the matting, such that an airflow restriction does not occur at this critical juncture. This soil gas T-Riser is unique because it has special ports, which allow each end of the SGC loop to enter the collection box without special connectors.  For use with soil gas mat (A.K.A vapor mat).

Visit our our Build Radon Ready page for FAQs, videos, photos and more!

The SGC T-Riser also has an ABS riser attached to it, which extends above the top of the concrete floor. Note that the future pipe opening is sealed to prevent wet concrete from entering the collection box.  After the concrete cures, a simple cut reveals the opening into which a 4 inch PVC pipe can be connected. This unique design allows for a clean and easy connection and prevents excessive air flow resistance.  T riser can also be cut to allow for 6″ schedule 40 pipe to be inserted instead of 4″.

The system of the SGC matting and T-Riser very effectively streamlines the installation process during new home construction. This is very important for builders who have tight time constraints when working with subcontractors. Two people can install 200 L.F. for a 2,000 sq.ft. basement in less than an hour. The savings in time and labor is significant.

DON’T FORGET: T Riser nails to secure in place during pouring/curing process

Soil Gas Mat Installation Guide

“T Risers” are installed approximately every 2,000 sq feet underneath the slab for radon-ready new construction in conjunction with Soil Gas Mat (SGM) to allow for radon gas to be exhausted safely.

SKU: 05-141-1 Category:

Description

Soil Gas Collector “T Riser”

Another key element of a soil gas collection system is attaching the riser to the matting, such that an airflow restriction does not occur at this critical juncture. This soil gas T-Riser is unique because it has special ports, which allow each end of the SGC loop to enter the collection box without special connectors.  For use with soil gas mat (A.K.A vapor mat).

Visit our our Build Radon Ready page for FAQs, videos, photos and more!

The SGC T-Riser also has an ABS riser attached to it, which extends above the top of the concrete floor. Note that the future pipe opening is sealed to prevent wet concrete from entering the collection box.  After the concrete cures, a simple cut reveals the opening into which a 4 inch PVC pipe can be connected. This unique design allows for a clean and easy connection and prevents excessive air flow resistance.  T riser can also be cut to allow for 6″ schedule 40 pipe to be inserted instead of 4″.

The system of the SGC matting and T-Riser very effectively streamlines the installation process during new home construction. This is very important for builders who have tight time constraints when working with subcontractors. Two people can install 200 L.F. for a 2,000 sq.ft. basement in less than an hour. The savings in time and labor is significant.

DON’T FORGET: T Riser nails to secure in place during pouring/curing process

Soil Gas Mat Installation Guide

Additional information

Weight 1.81 lbs
Dimensions 13 × 12.75 × 9.5 in