KTA-150 Fan Assembly
KTA-150 Fan Assembly
$218.53
KTA-150 Low Voltage Radon Fan replacement
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
How to Install your replacement low voltage radon fan
Regarding KTA Systems:
24 volt Class 2 power limiting power supply.
KTA 150 fan (See Fan Characteristics for Fantech FR-150, now PDS-150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths.
System operation/failure indicator as required by EPA Mitigation Standards.
Triple fail-safe electrical disconnect system at both fan and power supply.
Five year limited warranty
Easy to interpret system indicator for homeowner.
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system.
Capable of moving over 320 cfm
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.
Replacement Fan for KTA 25′, 50′, or 100′ low-voltage systems.
We recommend 6″ to 4″ couplers for 4″ PVC and 6″ to 3″ couplers to 3″ PVC
Low Voltage modification by hand in Colorado Springs, CO
Installation instructions on PDS YouTube page
Description
KTA-150 Low Voltage Radon Fan replacement
The Low Voltage KTA Radon System saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away to the fan (even outside). Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see indicator. You will appreciate the simplicity of installing the Low Voltage Radon system. Professionals will appreciate the speed of installation as well as positive comments from your clients about PDS’ Low Voltage.
How to Install your replacement low voltage radon fan
Regarding KTA Systems:
24 volt Class 2 power limiting power supply.
KTA 150 fan (See Fan Characteristics for Fantech FR-150, now PDS-150)
Special Class 2 cable available in 25′, 50′, & 100′ lengths.
System operation/failure indicator as required by EPA Mitigation Standards.
Triple fail-safe electrical disconnect system at both fan and power supply.
Five year limited warranty
Easy to interpret system indicator for homeowner.
For externally mounted applications refer to the Hydro-Sep for a special discount offer when purchased with a KTA system.
Capable of moving over 320 cfm
KTA systems come with a piece of pink or blue foam to measure the holes in the wall to hang the power supply box. This foam is to BE DISCARDED after measurements are complete. It is not meant to be a permanent part of the system.