See PDS’ newest products for radon remediation and testing. 3D printed, USA-made radon reduction equipment from local, family-owned vendors. See PDS products in action here.
Used in order to protect radon exhaust systems from debris and "critters"
3" or 4" schedule 40 compatible!
3" schedule 40 PVC slides directly inside the cap and can be secured with PVC glue and caulk.
Cap also slides inside 4" schedule 40 PVC and is then secured with caulk and optional screws.
Vent Guard Critter Guard
$23.28
Used for covering crawl spaces and other large earthen areas for a passive and active sub-membrane depressurization system. Sometimes called "six mil poly", this white polyethylene barrier gives a clean look. Available as under slab as a vapor retarder. Please call for sub-slab commercial pricing and other Stego Products. 15+ Mil available on order.
$207.90
The Rn2, one of Fantech's most popular fans, now comes in a speed controlled model. It's output can be tailored to the exact pressure field extension needed for each job. EC speed control can lower noise, energy, and fan curve all at once.
"It's so nice to just install and dial it in. No need to swap between different fans. It costs more, but my labor is cut down. These would be really nice for new mitigators that just want to carry two fans and don't understand fan curves or all the different fan models. The two EC fans have you covered. We fixed a house using only 4.5 watts of electricity!"
Jesse Green, Owner, American Radon Mitigator Anoka, MN 612-790-2928 “I installed the Rn2EC today. That thing is whisper quiet. The contractor that installed the radon system was here doing some furnace work for me and he did not believe it was even running until he looked at the manometer.” Satisfied Homeowner wishing to remain anonymous
$299.00
For use in systems when water must drain through to sump pit, but system vacuum must be maintained
Updated version of JS-5
$45.05
- 20 minutes ventilation/40 min re circulation, speed select mode
- relative humidity display
- LCD backlit
- ECO mode automatically selects best settings
- Ventilation display
- No battery to replace
$182.22
Price includes UPS additional handling. For order pickup, please call PDS.
Actual color may vary
AVAILABLE WHILE SUPPLIES LAST; NO REORDER
Radon barrier made of high density polyethylene, two-ply cross laminated 3 mil sheet, it is designed to resist puncturing and tearing. 20' x 100' roll ~35 lbs$252.18
Provide your family with fresh indoor air with an 81% thermally efficient, energy-star rated heat recovery ventillator by Fantech.
$1,485.00
Provide your family with fresh indoor air with an 81% thermally efficient, energy-star rated heat recovery ventillator by Fantech.
$2,337.50
Provide your family with fresh indoor air with an 81% thermally efficient, energy-star rated heat recovery ventillator by Fantech.
$1,705.00
Provide your family with fresh indoor air with an 81% thermally efficient, energy-star rated heat recovery ventillator by Fantech.
$1,410.82
Provide your family with fresh indoor air with an 81% thermally efficient, energy-star rated heat recovery ventillator by Fantech.
$1,870.00
Calcium dust, non-thermal "smoke" bottle. Each bottle contains enough for 300-500 puffs. Non-toxic and ship-able. (Product by REGIN FP-201). Product is non-toxic but should not be inhaled.
$50.55
For SGC Mat that needs to cross trenched footers on "mono-pours"
$55.55
Replace filter every 2-5 years HS300 HEPA filtration system.
$150.14
OVER $240 VALUE. SAVE WHEN YOU BUNDLE!
1- RP260 Fan
2 - 6x4 ULTRA flex LDVI couplers
1 - U-Tube
1 - Hydro-sep
3-CAUTION SYSTEM LABELS
$211.59
MI Rn4 Indicator Box for Exterior Mounting (box only), for use with Rn4 fan. Please note THIS IS NOT A LOW VOLTAGE SYSTEM
Enclosure may be different than pictured.
$273.30
**PFEDK.app will not work without internet access**
MSRP $2679.00
"The Fantech PFEDK is by far the best mitigation tool we have ever used! In the past, we would spend excess time determining pipe runs, air flow, and resistance. Deciding the right fan was only as good as our calculations and sometimes using a vacuum cleaner and a pitot tube would be misleading because of its differences from a radon mitigation fan. The Fantech PFEDK allows us to save time and money by determining the exact airflow and the exact radon fan every single job. It takes all the guesswork out and does all of the math and calculations for us. Every mitigator should have this tool! I highly recommend it!” Merritt Gantt, President and NRPP Radon Mitigator, True Air Technologies, North & South Carolina 833-878-3247 www.833trueair.com$2,715.17
IR 4 Iris Damper by Fantech
Cheaper and more effective than a gate valve$81.80
DISCONTINUED BY MANUFACTURER. SEE DWYER MICROMANOMETERS OR PFEDK FOR MORE.
Tutorial Video
Android App
Apple App
$165.00
KTA 1.0 Low Durometer Vibration Isolating Mitigation Package (Inside/attic fan placement) includes:
- KTA-150 Original Low Voltage fan with 1.0 meter system indicator.
- Two, 4-inch flexible fan to pipe Low Durometer Vibration Isolating couplers.
- 50' of cable with integral electrical disconnect.
- Charcoal canister short-term radon test kit & analysis.
- Alpha Track long-term radon test kit & analysis.
- Three system labels.
$553.26
Learn how to set up your KTA here
Low Durometer, Vibration-Isolating KTA-150 Mitigation Package (Outside fan placement) includes:
- KTA-150 Original Low Voltage fan.
- Electronic system indicator (install inside home).
- Two LDVI flexible fan to 4" pipe couplers.
- 50' of cable with integral electrical disconnect.
- Charcoal canister short-term radon test kit & analysis.
- Alpha Track long-term radon test kit & analysis.
- Three system CAUTION labels.
- Hydro-sep water separation device to protect fan longevity.
$564.32
Low-Durometer, Vibration-isolating coupling, in white. Now available for use with ANY fan make or model. Isolates vibration in fan housing, which in turn can lower noise.
Price for one single coupler. Two couplers per radon fan.
$17.51
Low-Durometer, Vibration-isolating coupling, in white. Now available for use with ANY fan make or model. Isolates vibration in fan housing, which in turn can lower noise.
Price for one single coupler. Two couplers per radon fan.
$16.50
Low-Durometer, Vibration-isolating coupling, in white. Now available for use with all fan manufacturers. Isolates vibration in fan housing, which in turn can lower noise.
Price for one single coupler. Two couplers per radon fan.
$22.48
Low-Durometer, Vibration-isolating coupling (single), in white. Now available for use with any fan make or model. Isolates vibration in fan housing, which in turn can lower noise.
Priced for SINGLE Coupler. Need two per fan.
$22.48
For SGC Mat that needs to go across heavy footer trenches.
Also available in 36". Call for pricing and availability!
$60.14
